• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Bad cyan test print on Roland 540

solantis

New Member
My cyan test print is very fuzzy.. I've tried normal to heavy cleaning, manual cleaning, used a syringe and replaced cap top but still the same.. Any ideas what's up?
 

Attachments

  • IMG_20180620_200217_1.jpg
    IMG_20180620_200217_1.jpg
    1 MB · Views: 282

Nismoasfuh

New Member
seems like your black is as well. Would make sense since cyan and black are on the same head on the sp540v. When was the last time you did the full maintenance? (wipers, cap tops, dampers etc.) Did this just start happening? Might want to also take a look at your bi-directional settings?
 

LFC911

New Member
Also make sure the ink isn't expired or near expiry. If that is good and you've changed the dampers, caps, wipers I would suspect the head may be getting to end of life, when was the last time it was replaced?
 
Top