We're currently screen printing our corrugated election signs which are mainly two colors. I'm looking for a flatbed printer so I can off load the smaller runs to the flatbed. I'm concerned about PMS matching for colors like reflex blue, purples, yellows etc. The other concern is the speed of the flatbed and what level off print speed I can get away with without causing banding. Most of the entry level flatbeds are doing about seven 4 x 8's and hour. It's too slow but I also don't want to spend 200k. We'll also be putting our 4 color work on the machine that I'm currently brokering out. Any advice would be greatly appreciated.