I am having problems with my Roland sp300i printer. The print test appears fuzzy and the calibration test is blotchy. The photo I attached shows it exactly. I printed using black and yellow and it prints fine. I do notice the red is blotchy. I had banding but that seemed to clear up. I cleaned the encoder strip, manual cleaned the printer and did some normal cleans.
(I’m not sure if I made it worse trying to unclog the red nozzle and I also left the clamp on the ink drain line and put it thru a clean forgetting to take it off and had a huge mess a few months back.)
(I’m not sure if I made it worse trying to unclog the red nozzle and I also left the clamp on the ink drain line and put it thru a clean forgetting to take it off and had a huge mess a few months back.)
