Software Help cadlink digital factory

[Claytons]

I've been recommended to buy this sofware with my Latex printer but I've just downloaded the trial version and I cant see if Its possible to add a contour cut or perf cut directly from the software or if i need to do it in another software first ? ( Like you can in flexi )

If anyone has any experience with this software I would appreciate some help, I have tried searching the web but there doesent seem to be much info out there.

 

[jimdtg]

Refer this page:

https://www.cadlink.com/get-your-jobs-ready-for-cutting-with-registration-marks/?fbclid=IwAR3mJXkvEE_X-Vu7b58srgC6oBMEssqhCXR6xF7gswgglnlxvZg9dDaKjTA

 

[Claytons]

Refer this page:

https://www.cadlink.com/get-your-jobs-ready-for-cutting-with-registration-marks/?fbclid=IwAR3mJXkvEE_X-Vu7b58srgC6oBMEssqhCXR6xF7gswgglnlxvZg9dDaKjTA

Thanks but that's not what I was asking about,

In flexi you can import your design then add a contour cut, per cut or both, then print the job and the cutter knows where the cuts need to be.

My question is, can cad link design factory do the same. Thanks for looking.

 

[jimdtg]

Thanks but that's not what I was asking about,

In flexi you can import your design then add a contour cut, per cut or both, then print the job and the cutter knows where the cuts need to be.

My question is, can cad link design factory do the same. Thanks for looking.

Which version DF are you trying trail test?
AFAIK SignLab has feature that allow you to add contour cut paths.

Refer this one:

https://www.youtube.com/watch?v=ElcCQNU04NQ

 

[Claytons]

I downloaded cad link digital factory print and cut, that the software being offered by my salesman. Not sign lab