CalderaRIP Profiles for Epson S9170

[Wrap Colorado]

Hey guys, back again .

Looking for either a fine tuned Generic gloss cast media profile for CalderaRIP, or recommended profiles from Epson Edge.

My canned Avery MPI 1105 profiles have always seemed heavy on ink, and I have had delam issues with prints for a long time regardless of 24Hour minimum offgassing in an offgas box.

I have looked at profiling in Caldera and have an i1 to do so, I just have no idea what I'm doing in that regard.

Not looking for a handout, if anyone out there has a recommendation for paid service to help me, I am very open to it. I got an Onyx profile from an industry professional to test, but don't know onyx, and only have a trial.

 

[Solventinkjet]

One quick fix you could try is setting the ink limits on your Avery profile. If it's not something you've done before, Google it. There are some tutorials on how to do it.

 

[Wrap Colorado]

One quick fix you could try is setting the ink limits on your Avery profile. If it's not something you've done before, Google it. There are some tutorials on how to do it.

Yeaaaaa... I looked at it, and want to do it, but have no idea what I'm looking at, or how to read the test target.