TXFB.INS
New Member
Have a car dealership who is wanting to get custom identification tags that are put on the back of the vehicle telling what dealership it was bought from.
The material looks to be a matte finish metallic silver self adhesive film that was shown to match
It is printed on in an opaque black.
The issue is the contour-cut to border spacing. Specifically they are wanting a very tight contour cut to the border.
Stouse wants a 1/8" from edge of print to the cut. This is too much for the customer.
Attached is the ideal spacing the customers looking for.
Overall decal is 2.52"h x 5.70"w
Text in the design is .25"h
Die cut / plotter with transfer tape.
They want 500 plus so looking to outsource as convenience
The material looks to be a matte finish metallic silver self adhesive film that was shown to match
It is printed on in an opaque black.
The issue is the contour-cut to border spacing. Specifically they are wanting a very tight contour cut to the border.
Stouse wants a 1/8" from edge of print to the cut. This is too much for the customer.
Attached is the ideal spacing the customers looking for.
Overall decal is 2.52"h x 5.70"w
Text in the design is .25"h
Die cut / plotter with transfer tape.
They want 500 plus so looking to outsource as convenience
