Change of parametres firmware mimaki jv3-160sp

[Renz]

Parametres firmware v 3.1 were dumped. Have loaded others from another printer.What to change in file param.csv, to clean error "non-original catrige" ?????? The information for reflexion http://www.megainkusa.com/MUSA/pdf files/Ink Installation Instructions Document ver 4 3-18-05.pdf My email: renmy@ya.ru
Thanks in advance
From me bottle

 

[inkmed]

Did you mean your printer can not recognize your permanent chips?
What is your current firmware version? Higher than 3.1?

You can use new permanent chips, the latest jv3 permanent chips version is 7.2
Or you can downgrade the firmware to 3.1

Adam Yang
Inkmed

 

[signs1970]

can you downgrade firmware from 7.3 to 3.1

can you downgrade firmware from 7.3 to 3.1

 

[inkmed]

Firmware downgrade tool is FWUpdateToolIIBeta04, you can try it.

Adam Yang from Inkmed

 

[Richard White]

Firmware downgrade tool is FWUpdateToolIIBeta04, you can try it.

Adam Yang from Inkmed

hi adam,
i know this post is old but , are you able to send me the firmware and tool to download on jv3-160sp
thanks i n advance
Richard

 

[Richard White]

hi adam,
i know this post is old but , are you able to send me the firmware and tool to download on jv3-160sp
thanks i n advance
Richard

my email is: anglinr1921@gmail.com