Chris Craft boat font?

[kustomsigns&designs]

can anyone help id this font or one close? i will be using for the "port of" portion of a boat name for a 410 Chris Craft Commander, the customer wants it to match.

 

[OldPaint]

if iam not mistaken, it was done by hand. a lot like the old FORD cursive. i dont think you will find a font as such, but since ive done a couple of these, you can find or build a good vector from it.
http://www.commanderclub.com/ClubHouse/CCCC_Logo.htm

 

[SignosaurusRex]

I think that the closest thing you might find is an obscure font Called TRAFTON REGULAR HEAVIER, I believe created by Dan Solo. It has some of the same characteristics yet is still so far off and much lighter in weight. I have heard that, according to Chris-Craft's marketing director, there is no established typeface or font, although they have given their blessing for anyone who would like to create an entire font based on the logo....still non are known of. We had a very large project about 2 years ago that use of that typeface/font was requested to be used. An alternate was eventually decided on and approved.

 

[Rick]

sorta close is Kinescope at Fontbros.com
the top is stock, the bottom is 5 minutes of modification....