I have a CJV150-130 doing a weird thing. It did it a few times a year or so ago but then self corrected so I never figured it out. We prep all our files the same. We use flexi. We print with reg marks, laminate, then run back through the mimaki to cut. During the alignment reg marks reading the laser reads mark 1 then 2 then the laser moves approx 1.5" to the side before feeding the print. So when it hits mark 3 it misses by 1.5" It seems to only do this when the print is going to be fairly long(over 10ft)
Video of the problem:
Video of the problem: