Located in North Atlanta Area, in Gainesville GA.
First up is my screen printing equipment have a 36"x48" light table with Lawson vacuum hood and timer, works perfect. Can include vacuum pump or buyer can use a shop vac to Pull down urethane rubber nice and tight. Has served me well. Also have a Lawson 3'x4' manual "one arm" print table that I use mostly to print 18"x24" and can run over 1,000 corrugated plastic signs both sides per day by myself. Have two Lawson Speed racks that retail at over $8,000 each. These racks retail for over $4,000 each here is the link to Lawsons website. https://lawsonsp.com/products/drying-racks?variant=45037349966 Will sell the light table/exposure unit, emulsion trays, both speed racks (have other racks that hold 100 18"x24"s and roll out of way), screen table and 18 aluminum frames with fabric installed ready to put into service plus all my screen ink inventory (for corrugated plastic and aluminum) to first person who shows up to pick it all up for $3,000. I also have a 36"x120" one arm print table with vacuum hold down if printing banners or posters will sell for $500, I have added a easy to remove width extension as I mostly printed 48"x98" real estate and political signs on it. Have some screens of various sizes will through in with it.
Also selling a 30 Horse power Air Compressor with After Cooler, Air dyer, breathable air filtration unit, air cooled Clemco sandblast helmet and 100 pound sandblaster, almost new Grainframe for sandblasting wood texture into HDU (switched to CNC routing soon after buying the grain frame) asking only $1,500 for it all but buyer has to come gather it all up and haul away. Have broken spine three times and currently going through cancer treatment. (listed on Craigslist)
Have a 36" Pexto metal shear recently serviced by professional millwright asking $600 picked up at my shop, buyer has to load. (listed on Craigslist)
Have a Miller Millermatic 251 with very low hours, spool gun for aluminum, two current tanks ready to put to work asking $2,500 picked up at my shop. (listed on Craigslist)
Very nice Ruoff notcher for channel letters bought rebuilt then made two sets of letters with before I broke my back and was unable to make channel letters anymore.
Have a Delta 10" table saw with custom out feed table giving 48"x96" work top that can be removed, shaper, jointer, Dewalt radial arm saw with dust pick up system, all is listed on Craigslist. There is much more including a Gerber 30" HS Plus plotter, Gerber Edge, and selling a Gerber Sabre 408 router with mist coolant system and 25 horsepower vacuum pump for vacuum hold down only asking $3,500 for someone willing to come, uninstall, remove it and haul away. TEXT me at 770-533-2801 and I can send photos or links to Craigslist listings. It all needs to go. I am about to go into back surgery and need to be out of my shop. Also interested in selling my metro Atlanta phone number have had for over fifty years but had a area code change forty years ago when Georgia was split into two zip codes from one and now we have more than I can count. Message machine fills up with good leads every week but i am no longer working, would be a good way to pick up all my clients and those that know our reputation. There is much more just have to text me with anything may be interested in.
I will try to check back here but Text messages are always the best way to contact me. Unable to crate and ship anything, buyers must come and pick up include loading which is why prices reflect it. It is all good equipment and whats mentioned is just the highlights.
First up is my screen printing equipment have a 36"x48" light table with Lawson vacuum hood and timer, works perfect. Can include vacuum pump or buyer can use a shop vac to Pull down urethane rubber nice and tight. Has served me well. Also have a Lawson 3'x4' manual "one arm" print table that I use mostly to print 18"x24" and can run over 1,000 corrugated plastic signs both sides per day by myself. Have two Lawson Speed racks that retail at over $8,000 each. These racks retail for over $4,000 each here is the link to Lawsons website. https://lawsonsp.com/products/drying-racks?variant=45037349966 Will sell the light table/exposure unit, emulsion trays, both speed racks (have other racks that hold 100 18"x24"s and roll out of way), screen table and 18 aluminum frames with fabric installed ready to put into service plus all my screen ink inventory (for corrugated plastic and aluminum) to first person who shows up to pick it all up for $3,000. I also have a 36"x120" one arm print table with vacuum hold down if printing banners or posters will sell for $500, I have added a easy to remove width extension as I mostly printed 48"x98" real estate and political signs on it. Have some screens of various sizes will through in with it.
Also selling a 30 Horse power Air Compressor with After Cooler, Air dyer, breathable air filtration unit, air cooled Clemco sandblast helmet and 100 pound sandblaster, almost new Grainframe for sandblasting wood texture into HDU (switched to CNC routing soon after buying the grain frame) asking only $1,500 for it all but buyer has to come gather it all up and haul away. Have broken spine three times and currently going through cancer treatment. (listed on Craigslist)
Have a 36" Pexto metal shear recently serviced by professional millwright asking $600 picked up at my shop, buyer has to load. (listed on Craigslist)
Have a Miller Millermatic 251 with very low hours, spool gun for aluminum, two current tanks ready to put to work asking $2,500 picked up at my shop. (listed on Craigslist)
Very nice Ruoff notcher for channel letters bought rebuilt then made two sets of letters with before I broke my back and was unable to make channel letters anymore.
Have a Delta 10" table saw with custom out feed table giving 48"x96" work top that can be removed, shaper, jointer, Dewalt radial arm saw with dust pick up system, all is listed on Craigslist. There is much more including a Gerber 30" HS Plus plotter, Gerber Edge, and selling a Gerber Sabre 408 router with mist coolant system and 25 horsepower vacuum pump for vacuum hold down only asking $3,500 for someone willing to come, uninstall, remove it and haul away. TEXT me at 770-533-2801 and I can send photos or links to Craigslist listings. It all needs to go. I am about to go into back surgery and need to be out of my shop. Also interested in selling my metro Atlanta phone number have had for over fifty years but had a area code change forty years ago when Georgia was split into two zip codes from one and now we have more than I can count. Message machine fills up with good leads every week but i am no longer working, would be a good way to pick up all my clients and those that know our reputation. There is much more just have to text me with anything may be interested in.
I will try to check back here but Text messages are always the best way to contact me. Unable to crate and ship anything, buyers must come and pick up include loading which is why prices reflect it. It is all good equipment and whats mentioned is just the highlights.