Color profile for banners

[D2S]

I haven't found a color profile I love for banner materials on my latex 110 does anyone have any suggestions

Sent from my SM-N950U using Tapatalk

 

[pholt1]

I haven't found a color profile I love for banner materials on my latex 110 does anyone have any suggestions

Sent from my SM-N950U using Tapatalk

Yea you have to make your own


Sent from my iPhone using Tapatalk
www.this-creative.com

 

[flyplainsdrifta]

i would start with a generic profile then build and test from there. otherwise you can download the material you are using and tweak it until your happy.

 

[dypinc]

i would start with a generic profile then build and test from there. otherwise you can download the material you are using and tweak it until your happy.

What output profile editing software would you recommend for tweaking profiles?

 

[papabud]

profile editing, depends on your rip, if you use onyx. their profile builder works perfectly for me

 

[flyplainsdrifta]

i run caldera and fine tune on there what can't be done on board with my 560. all else is thru calderas easy media

 

[papabud]

i dont think you can profile colors on the machine, but you can adjust the print factors which is a big part of the profiling. all the feed rates, temps fans and vacuum settings can be done on the machine end

 

[Pauly]

i dont think you can profile colors on the machine, but you can adjust the print factors which is a big part of the profiling. all the feed rates, temps fans and vacuum settings can be done on the machine end

If that's the case, having a book with notes for different materials will help.