• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Question Connecting Mutoh ValueCut 1300 wireless

K Chez

K Chez

New Member
Has anyone done this? Recently moved my business - the configuration of the new shop has the VJ 1300 (and a Roland CX300) farther away from the computers than before. I bought a pair of 35 ft USB A to B cables with the booster chip only to find out that the chip is incompatible with both machines. Was thinking that a wireless USB print server could solve the problem. The other solution could be an ethernet connected print server, but there are two different OS's on the computers that run each. (And I had to trick the CX300 into working by using a GX300 driver on Windows 7 as there are no drivers for that machine past windows 2000.) Any help/advice is appreciated.
 
Attila Nagy

Attila Nagy

New Member
Use the Serial port. It can be extended long, but only if you have serial interface on your motherboard or Serial interface card. USB serial adapter cannot be extended with long Serial cable.

If you have a real cutting Software (CutStudio is not the one) GX300 can be used without Driver on any OS. For long distance, Serial connection preferred as well.
 
Last edited:
You must log in or register to reply here.
Top