Caleb Jones
New Member
We have a Roland XC540 and use versaworks to RIP. My Lc and Lm heads are down wile parts are ordered but we can print fine with CMYK only. This is easy to control with vector work. We just make sure all the Cyan and Magenta levels are above 50% and the RIP only calls for heads 1 and 2. However if the Cyan or Magenta levels are below 50%, it calls for heads 5 and 6 to print and. Of course no ink prints.
Is there a way to have versa works see our printer as a 4 head CMYK and send all cyan/magenta requests to the C and M heads?
Is there a way to have versa works see our printer as a 4 head CMYK and send all cyan/magenta requests to the C and M heads?