Suggestions Decently priced CNC router

[tbullo]

I recently purchased a chineese 5x10ft with vaccum table and dust collector.
I was leary, but received machine no issues just had to rewire some things and change settings to work in states. With customs and fees cost just under 10k. Laguna is getting them from same supplier, I can get them with special colors and logos.

Still curious about this. Care to share?

 

[Chriswagner92]

We've been running a Camaster Cobra CR-510 for about 3 years now, and have a backup 5x10 Warthog CNC. Both machines are controlled by WinCNC ... . The Camaster support is top notch. We just had a ground go bad in the touch top sensor and their tech was able to stay on the line for hours while working with our CNC guy to diagnose and find a workaround to get us back up and running.

 

[Bingleardicus]

Summas arent bad, also the APEX by amcad, its pretty much a chinese Zund.


I have an x carve for small stuff but outsource to shops with a colex and one with a summa.

 

[WinGraphics]

We've had our Colex for two years. No problems at all and very few issues have been resolved by support remotely.
I would buy another one in a heartbeat.

 

[Bly]

Zund.