paul luszcz
New Member
I'm looking for a supplier or subcontractor to supply and engrave names on antique brass or bronze plaques. These would be similar to the common brass plaques that are mechanically engraved by trophy shops, but with an antique bronze finish.
The project involves a stone plaque that was sandblasted to provide for the installation of 28 6" x 1.5" bronze plaques. The stone is installed in a major university building and the school wants to engrave one of these plaques each year, starting with two that are needed now.
In order to match the plaques for 28 years, the school will buy 30 or so and have one engraved each year.
If you know who can do this, or at least where to get the antique bronze material, please let me know.
The project involves a stone plaque that was sandblasted to provide for the installation of 28 6" x 1.5" bronze plaques. The stone is installed in a major university building and the school wants to engrave one of these plaques each year, starting with two that are needed now.
In order to match the plaques for 28 years, the school will buy 30 or so and have one engraved each year.
If you know who can do this, or at least where to get the antique bronze material, please let me know.
Last edited: