• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Suggestions Epson S40600 vs hp latex 115

P Wagner

P Wagner

--
Stinky Prints said:
If anyone out there has suggestions on obtaining clean fills and crisp text on stickers and smaller items on vinyl on an HP Latex 365, I'm all ears. We typically use Orajet 3258 and HP Prime Air vinyl for much of our print and cut items. Good luck!
Click to expand...

1. Verify that nozzle performance is good - run a Nozzle Test print to verify this.
2. Perform a printhead alignment - there are two types of alignment, automatic and manual. Accurate printhead alignments are critical for grain reduction. Various SAV films will exhibit different amounts of grain.
3. For small type, use the10-pass uni-directional print mode. It permits printing down to 4-point type. This print mode has been available for about a year on the 500 Series, and is new on the 300 Series. It makes a big difference in type clarity for both positive and negative type. Make sure that your firmware is up to date on your printer:

Latex 3x0:
https://support.hp.com/us-en/drivers/selfservice/hp-latex-360-printers/6838371

Latex 3x5:
https://support.hp.com/us-en/drivers/selfservice/hp-latex-365-printer/12709301

Latex 5x0:
https://support.hp.com/us-en/drivers/selfservice/hp-latex-570-printer/10722009
 
You must log in or register to reply here.
Top