• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Need Help Error 205 47V printhead

woidstyle

New Member
Hey guys, after removing printhead for cleaning and exchanging cables (firstly I actually used the wrong ones with same amount of pins) I got the mentioned error code. But even after having installed the right cables I still have this error occurring!
 

Solventinkjet

DIY Printer Fixing Guide
Check the F13 fuse on the main board for continuity. It may have popped when the wrong cable was installed. If the fuse is good, it could be other electrical damage unfortunately. In my experience, if it's not the fuse, the head is usually fried.
 

woidstyle

New Member
Check the F13 fuse on the main board for continuity. It may have popped when the wrong cable was installed. If the fuse is good, it could be other electrical damage unfortunately. In my experience, if it's not the fuse, the head is usually fried.
Thanks for the feedback!! Now it's ok again, so will clean the printhead again and put it in operation..
 

woidstyle

New Member
Check the F13 fuse on the main board for continuity. It may have popped when the wrong cable was installed. If the fuse is good, it could be other electrical damage unfortunately. In my experience, if it's not the fuse, the head is usually fried.

Hi, after changing the fuse I have another problem. The left magenta keeps on firing all the time during test print!
 

Attachments

  • 20201003_190520.jpg
    20201003_190520.jpg
    895 KB · Views: 80
Top