Extreme Makeover - The Entries

[Fred Weiss]

We have a total of 33 entries in the Extreme Makeover Design Contest. Vote once for your favorite. Voting ends in 2 weeks at 11:30 PM, Saturday, May 19, 2007.

Entry #1

Replicator

 

[Fred Weiss]

Project Notes: I figured it would be done on MDO w/ 4x4 wood posts and
pre-fab decorative post tops, along with the mounting hardware.

With that in mind, I could get the job done for around $600.00 to $700.00 for everything.

Entry #2

Ground Chuck

 

[Fred Weiss]

Project Notes: I figured it would be done on MDO w/ 4x4 wood posts and
pre-fab decorative post tops, along with the mounting hardware.

With that in mind, I could get the job done for around $600.00 to $700.00 for everything.

Entry #3

Ground Chuck

 

[Fred Weiss]

Entry #4

Signage

 

[Fred Weiss]

Entry #5

Ken

 

[Fred Weiss]

Entry #6

Bladegraphics

 

[Fred Weiss]

Entry #7

Isign

 

[Fred Weiss]

Entry #8

Jillbeans

 

[Fred Weiss]

Entry #9

Flame Master

 

[Fred Weiss]

Entry #10

Jillbeans

 

[Fred Weiss]

Entry #11

Stevo Design

 

[Fred Weiss]

Entry #12

Project notes:

Vid

 

[Fred Weiss]

Entry #13

Replicator

 

[Fred Weiss]

Entry #14
Project Notes: Scope of work:
1. Remove existing sectional sign top panel from both sides.
2. Cut off tops of posts (if neccasary) at 34" above existing sign bottom sections.
3. Apply decorative top caps to posts.
4. Paint posts and caps Blue (color match new sign border)
5. Supply and Install* (2) New full color** 38"h x 48"w Dibond sign panels (per supplied proof)

* Install new signs over existing panels, using 3M V.H.B. tape and Contractors Adhesive.
** (A) Digital Printed Media Laminated or (B) Cut Vinyl & Hand Painted

Price: $991.44 (U.S.) ( sales tax & removed panel*** disposal included)

*** Subject to recycle or re-use for future signage projects by xxxx sign co.

Signosaurus Rex

 

[Fred Weiss]

Entry #15

Holeshotrob

 

[Fred Weiss]

Entry #16

Flame Master

 

[Fred Weiss]

Entry #17

Project Notes: Just tried to keep it classic to fit in with the idea of antiques, but used the red to make it stand out on the road. A little paint and some new vinyl would do wonders.

Torgy97

 

[Fred Weiss]

Entry #18

Stevo Design

 

[Fred Weiss]

Entry #19

Jillbeans

 

[Fred Weiss]

Entry #20

Project Notes: Since the budget was $995.00. i would use the same sign i would repaint the existing sign panels black and install a cutout MDO overlay over the sign to give it a little more dimension to it the overall size of the cutout would be 48"x30"

Tikiboyz