Fabric textured laminate.

[CC-CMYK]

I know 3m makes their 8900 series laminate but it’s pricey. Is there another brand out there that produces textured laminates in a fabric, canvas, or linen texture?

 

[Humble PM]

You could try Drytac Canvastex https://www.drytac.com/wp-content/uploads/2018/06/Drytac-Protac-Deep-Textured-Canvastex-UK-TDS.pdf

 

[Johnny Best]

Lexjet might have some.

 

[CC-CMYK]

You could try Drytac Canvastex https://www.drytac.com/wp-content/uploads/2018/06/Drytac-Protac-Deep-Textured-Canvastex-UK-TDS.pdf

It doesn’t seem to be available at any of my distributors anymore. Do you have any suggestions of where I can buy this?

 

[Humble PM]

Sorry, that was a UK only product.

These should be available in the Americas

ReTac Textures: Removable & Repositionable Wallcovering Film | DRYTAC

ReTac Textures Sand: removable vinyl with a sand finish.

www.drytac.com

Linen
RTCL54150 - 54” x 150’ (1372mm x 46m)
Canvas
RTCC54150 - 54” x 150’ (1372mm x 46m)

 

[MarkSnelling]

Drytac has textured printable films that are great like the Retac suggested above. There are some embossed laminates out there but they are hard to come by. The most popular would be the typical sand-texture you see in floor graphics. Can your job be printed on a textured film? That would solve your problem and give you the look you are chasing. I've got a warehouse full of Retac textures.