FC-7000-160 Load Media error

[iroquoisprint]

Hello I need some fast help!
I put in media and cut out my graphics. Took that sheet out and the next day loaded another sheet in turned on the machine and it just says "Load Media"....using same paper I have been since we got this machine, the lighting did not change, machine has not been moved. I did notice a slight electrical "hum" from the box that holds the cutter but that is it. I have to get this job done and the closet help is 100 miles away and I really dont have the money anyway to have some one fix it so any help would be great!
Cheryl

 

[iroquoisprint]

fixed it...thanks to all that helped me in time of need...not!!!

 

[Brandon708]

I saw this but I didn't know any solutions. What was the problem with it?

 

[Bigdawg]

fixed it...thanks to all that helped me in time of need...not!!!

I didn't know the answer either :-(

But you could help someone else who may be having the same problem in the future by posting what happened and how you fixed it...

even if it's something silly like "I forgot to put the media clamps down" (which is something I would do )

 

[CS-SignSupply]

Loose pinch roller lever? Dirty rear edge sensor?

 

[iroquoisprint]

Take off the Side cover...there is a piece of metal attachhed to the media arm...mine had some how jumped out of the position between the sensor..I just pushed it back into place ...all is good.