• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

FineCuts VS WinPlot

Ginger Cutler

New Member
Good afternoon. So at my shop I used FineCuts for Illustrator on my Mimaki CG-75 FX II. Now at my current Job I have a Summa T750 Pro. Could I use FineCuts with the Summa instead of WinPlot? I really don't like using standalone software and would prefer to use FineCuts. Pleae advise
 

PHILJOHNSON

Sales Manager
Unfortunately you will not be able to use FineCut with your Summa cutter. Winplot is a good, albeit very basic, cutting program that works with the older Summa cutters like the T750 you are using. Other programs like FlexiSign, Signlab, etc. will work as well if you have access to either or both. For the newer Summa cutters the GoSign software is an option as well.

Best regards,

Phil Johnson
Airmark Corporation
(800)527-7778, ext. 112(office)
(509)280-6354(cell)
philj@airmark.com
 
Top