Flexi for two printers and cutters?

[Jaswp]

Hi! I have my HP latex 115 print and cut equipment hooked up to my computer and flexi. I am purchasing another print and cut combo, can I use it with the same flexi program and computer? Any issues that can occur?

 

[DChorbowski]

You shouldn't have any issues. Just be sure to name each of the printers and cutters so you know which is which.

 

[balstestrat]

That license is probably limited to only certain HP printers and just one printer at a time... You will have to pay to upgrade.

 

[ddarlak]

I run two HP 315s using the flexiprint that comes with them and you cannot run them on the same PC. I use two PCs, works well for an instant backup if one PC goes down. I backup each computer to the other. I have Flexipro installed on both, with the key in one of them. I never need the flexipro the other, but if I did, take the key out of the other and it's up and running.

 

[Chris-H]

You can run up to five devices off of one license. Just make sure to keep track of your IP addresses for the printers.

 

[balstestrat]

You can run up to five devices off of one license. Just make sure to keep track of your IP addresses for the printers.

How so? Usually it's limited to one only.

 

[Chris-H]

How so? Usually it's limited to one only.

In Production Manager in the top right corner, below the file icon, there should be an option to Add Device. If you have multiple printers or plotters running through a switch, you should be able to shuffle through them in Production Manager.

 

[balstestrat]

In Production Manager in the top right corner, below the file icon, there should be an option to Add Device. If you have multiple printers or plotters running through a switch, you should be able to shuffle through them in Production Manager.

And when you try that on OPs bundled HP flexi you will notice it won't let you print simultaneously to over 1 printer..
Won't even allow adding anything else than L115 and L315 now that I checked. (22 seems to be for L700 as well)

 

[Chris-H]

And when you try that on OPs bundled HP flexi you will notice it won't let you print simultaneously to over 1 printer..
Won't even allow adding anything else than L115 and L315 now that I checked. (22 seems to be for L700 as well)

You are right. I completely forgot I had gotten rid of that version because of that issue. Sorry!

 

[Joseph44708]

I'm currently running three Roland printers and four Graftec cutters on one computer with Flexi 22

 

[Solventinkjet]

Yup, either run two computers or get the full blown version of Flexi and run whatever you want.