General Formulation 222 - Thoughts?

[Pski89]

to be used for stickers mainly to give stickers a thicker feel, compared to regular vinyl and paperbacked adhesive which I apparently cannot find in stock anywhere.

 

[BigfishDM]

You should try these first, thick and good! https://hallidaydigitalsupply.com/category/StickerDecal-Vinyls

 

[Pski89]

ehh.. for eco-sol inks?

 

[hybriddesign]

to be used for stickers mainly to give stickers a thicker feel, compared to regular vinyl and paperbacked adhesive which I apparently cannot find in stock anywhere.

Gf222 is great stuff for stickers. That or the gloss equivalent

Bigfish, is that your new line?

 

[Goldenstateprint]

I use this with my clients for non-laminated 6mil stickers, it works great, easy to peel off backing and they re

d for stickers mainly to give stickers a thicker feel, comp

ally like the matte finish.

 

[hobbymad]

Just be sure to cut well after printing, they curl up like mad otherwise

 

[Mr. Signboy]

I use 223 which I think is similar, for a few different recurring jobs. It works well for things that are applied by customers, it’s pretty easy to use if you don’t have vinyl experience.

 

[CanuckSigns]

Just be sure to cut well after printing, they curl up like mad otherwise

I've never had the GF 6 mil vinyl curl up , even when cut 2 minutes after printing.

 

[hobbymad]

I've never had the GF 6 mil vinyl curl up , even when cut 2 minutes after printing.

Only happens when I print too close to the edge. The labels I make are 100% black too, so that is a large ink coverage. Definitely can't do bleed cuts straight after either.