graphtec 8600 good setting for perf cutting?

[steve@nodinx]

Okay so i have been playing with these settings and cant get a good clean edge and something that punches out easily.. anyone have a good setting for perf cut (half cut) on stickers its a simple design rounded edges and 3 half circles at the top of the box


cut line pattern settings and force and speed for this.
graphtec fc 8600 material is lammed

 

[Sign Pro CT]

We have a Graphtex FX 2, we use 2 for speed and 160 pressure, make sure all your inside corners are round. It take a while to cut but they come out good on my cutter.

 

[Scotchbrite]

That looks like too much pressure. The other problem would be if you've got junk in the knife holder not allowing it to swivel properly.

 

[Jason1]

I just bought a fc 9000 I used this guys setting to do a single perf cut and it worked very good..

He recommends a 60 degree blade also..