Graphtec CE5000-60

[Sign-Man Signs]

Just yesterday, when I load my media, the printer used to origin set at whatever was advanced past the cutter. Now, it rolls the media back to the cutter and leaves about a 1/2 inch margin which sometimes gets caught in the cutter tray when cutting. Now I have to manually advance it past the cutter tray and re-set origin. I have hit a wrong button somewhere. Any ideas. I'm using Flexi Pro 8.6.

 

[Sign-Man Signs]

bump

 

[CS-SignSupply]

You need to choose Roll 2 instead of Roll 1 when setting up your vinyl.

Roll 1 senses the front edge of the material. Roll 2 ignores the front media sensor.

Hit the Down arrow before you hit enter when setting it up... menu should say Roll 2

 

[Sign-Man Signs]

You need to choose Roll 2 instead of Roll 1 when setting up your vinyl.

Roll 1 senses the front edge of the material. Roll 2 ignores the front media sensor.

Hit the Down arrow before you hit enter when setting it up... menu should say Roll 2

Thank you. Worked great.