Suggestions Graphtec FC9000-160 Large Window Tint Plotting

[craigwojo]

Hi everyone,
I'm working on a job with large window film pieces. (commercial) Aproximently, 60" x 80".
I have no problem with the installation but, when plotting out the cut, the material gets all jammed up (creased) because of the static against the film.
I set the speed to 10 (slow) so I could watch both sides of the plotter and possibly catch if there was a crease or static cling of the film being plotted. Pain the in the butt. The material is not static cling material.
The material is a basic mirror 5% window tint with a light adhesive that is applied to the window with soap/water solution.
This is taking way too long to plot the window film pieces while watching it all the time.

Any suggestions? Please.

Thank you and God bless,
Craig

 

[victor bogdanov]

Graphtec antistatic kit

Graphtec Anti-Static AKZ Kit for FC and CE Models

Graphtec Anti-Static AKZ Kit for FC and CE Models

uscutter.com

I remember seeing a Graphtec tint bundle that came with the antistatic kit

 

[BetaCtz]

No answer for you.
But wondering why you're trying to cut it in the first place? I'd be bulk installing and trimming on glass for something that large.

 

[Joseph44708]

I use Copper Tinsel on my sheet fed presses and screen printing press to eliminate static