GS6000 and 16 pass

[mudmedia]

What is the correct way to change from a 8 pass bi directional setting to 16 pass bi directional setting on an epson gs6000? We run Onyx production house x10 and do not see a pass setting where you can adjust microweave / temp settings in onyx.

Any help would be greatly appreciated. Thanks

 

[AUTO-FX]

I dont know, but this might be interesting

http://www.youtube.com/watch?v=6MplPHDm0-k

 

[MJerome]

Are you using a media profile you created yourself?

 

[mudmedia]

Are you using a media profile you created yourself?

Yes I am.

 

[P Wagner]

What is the correct way to change from a 8 pass bi directional setting to 16 pass bi directional setting on an epson gs6000? We run Onyx production house x10 and do not see a pass setting where you can adjust microweave / temp settings in onyx.

Any help would be greatly appreciated. Thanks

Those changes would need to be made in the Media Manager module of Onyx. You would likely copy an existing print mode and make the changes to the copy. You really should build an entirely new print mode when making a dramatic change to pass counts like this (8 to 16 pass).