Mike Brice
New Member
Is it possible to print different images on a double sided banner with the HP 360. I've done same image on both but we have a job now that requires separate images. Thanks in advance for the input.
-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
Help w/HP 360 Dbl-sided printing
- Thread starter Mike Brice
- Start date
balstestrat
Problem Solver
Yeah it is. You just print first as A side and then set up the 2nd as B and it will start from the line.
myront
CorelDRAW is best
Yes, we do it all the time. Drop two seperate files into the RIP hot folder. Print side A flip and print side b. Side a has a cut & fold line, as well as, dots for grommet placement. Simply omit all that stuff for side B but include the blank perimeter of the banner if not a full edge print. Mark your leading edge placement so when you flip you know where to begin again. You get the gist of it. I don't know the exact procedure because I'm not the print tech.