• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

help with canon TA-30 Printhead

Y

yonu

New Member
Quick question i'm hoping someone here is good with canon printers I have a TA-30 with a PF-06 printhead that started giving a can't fill printhead error on the Matte Black tank so after trying 4 cleanings in maintenance mode I decided to replace the printhead. However, every printhead I install gives me a error screen saying printhead not recognized yet if i put the old one back in I just get this screen I am hoping someone here may have some advice, cause i have literally tried 3 printheads
 

Attachments

  • photo_2025-09-25_10-10-29.jpg
    photo_2025-09-25_10-10-29.jpg
    796.5 KB · Views: 2
Y

yonu

New Member
Well in maintenance mode if I run a nozzle check and a pallet test print I get perfect prints but I cannot get it to bypass the cannot fill print head message in normal mode
 

Attachments

  • 20250926_130236.jpg
    20250926_130236.jpg
    1.7 MB · Views: 0
You must log in or register to reply here.
Top