Help with Enduralam Laminator

[mharrison]

Looking for someone with experience with using this laminator. What was done to laminate without issues. Having problems with laminate wrinkle on left hand side of machine. All calibration of roller height and pressure has been done along with chain tension. All help would be appreciated.

Martin

 

[ProWraps™]

ours works great. just put lots of tension on the feeding spools.

 

[oc63rag]

This diagram may help to make sure everything is fed correctly:
http://www.eastsign.com/Cold.htm
You have to scroll down to the bottom to see it.

Have you checked to see if your tension is consistent all the way across the rollers?