Help with replacing a part SP540V

[Bartlett]

Iam replacing the flexible tool carriage cable on my versa camm sp540v, but looking through the roland instructions i see that i must remove some rivets from the cable guide. What is the best method of removing these things without wrecking them and my chances at re-assembly.

Any other tips on the process as a whole would be appreciated!

Thanks!

 

[RMXGRAPHIX]

The rivets are plastic and with a dental pick or #11 xacto blade you can pull up the center about a 1/4 of an inch (.250) and it should come right out then you will see how it works, reverse is put the rivet in the hole then push the center pin back in expanding the 3 or 4 fingers on the rivet you can do a google search on plastic drive rivet to get a better on what it looks like or go here

http://www.tools-supplies.co.uk/automotive-trim-clipsbody-clipsbody-fixings-156-c.asp

hope this helps jR