Zendavor Signs
Mmmmm....signs
Does anyone have experience making a sign to withstand high temps? I have a customer looking for one that will be exposed up to 600F. I was thinking solid aluminum sign with Sherwin Williams high temp paint.
-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
High Temperature Paint sign
- Thread starter Zendavor Signs
- Start date
Notarealsignguy
Arial - it's almost helvetica
Could you get a black sheet and sandblast out the letters?
DL Signs
Never go against the family
McMaster Carr sells high temp paints. Limited colors (aluminum, black, grey, white) up to 1,200 degrees and black radiant coatings that go up to 2,000 plus degrees.
https://www.mcmaster.com/high-temperature-paint/maximum-temperature~range~~-1777579616141/
https://www.mcmaster.com/high-temperature-paint/maximum-temperature~range~~-1777579616141/
Zendavor Signs
Mmmmm....signs
They want colors for the logo. Wouldn't a black sheet still be painted?
Notarealsignguy
Arial - it's almost helvetica
I think it's a baked enamel. I'm assuming it can withstand higher temps but don't actually know for sure. For colors, sounds like high temp paint is your best bet.