Honda Red Epson S80600 Onyx

[Alex116]

Hello all,

does anybody have a good recommendation for the Honda CRF Red to hit the plastic Color perfect?

We work with onyx and an Epson 80600, and most of the Pantone Colors.

Best regards Alex

 

[yannb]

Do you have the LAB values of the colors you’d like to match, or RAL or Orajet vinyl number?

 

[jfiscus]

On our Epsons with Onyx we have our standard profile that we have a Pantone chart printed from, and we also have a "common setting" where in Onyx we bump up every color 15% and we print the chart from that profile also to see where everything hits at there. From this point you can choose either a good color match color, or be able to make a custom color/test from there.
*remember that when you're bumping the sliders up that every color in your print gets adjusted, so plan accordingly

 

[cmoist]

Bike Graphix is using 2035C for 21-22 CRFs and 3546C for 20 and older CRFs. They print with 80600s. Of course, this varies based on profile, media, etc.

 

[Alex116]

Bike Graphix is using 2035C for 21-22 CRFs and 3546C for 20 and older CRFs. They print with 80600s. Of course, this varies based on profile, media, etc.

Thanks a lot, do you also have values for the rest of the colors or Pantone? That would be awesome

 

[cmoist]

Open it in Illustrator and click on the swatches to see the pantone numbers.