Horizontal slatwall graphics install

[Hicalibersigns]

Ok, I have a customer that we are doing vinyl on slat wall. There is an area of 12' wide by 8.5' tall that we are covering. We tiled horizontally with a 6.5" overlap so that when we cut out for the slats there will be no seams on the install. Question is, how is the best way to handle a 12' wide horizontal vinyl install?

Any suggestions would be appreciated.

 

[signswi]

There is no best way, slat wall is a pain done with adhesive vinyl application (as opposed to direct print). Maybe see if you can find some construction and bribe the steamroller guy to roll over it as a giant pressure laminator.