TX Houston: 8ft x 8ft CNC Machine Router Servo 9Kw Spindle 12 ATC ISO30 Pendant

[dmoore]

Two CNC Tables with:
* $17,700 for 1, $17,000 each for 2 units
* 2500 x 2500mm (98.4 x 98.4 inches) cutting area - This allows you to cut two 4x8 sheets side by side
* Full REAL servo drive on X/Y/Z - this thing is crazy fast with rapids
* 6 Inches of Z under collet
* T-Slot Table
* 9Kw Automatic Tool Changing Spindle (air cooled) / 18k RPM with 12 Tool slots (tool holders included)
* ISO30 Tool Holders
* Oil Lubrication System
* 380 to 480v AC / 3 Phase / 60hz power input (could be converted to single phase by a smart person)
* Touchoff for ATC tool height setting
* Braking Resistor
* Emergency Stops on gantry
* Weihong NK280 Control system - works with vCarve (will provide profile), Fusion 360 and all other common G-Code Systems with 9 feet of cable between control panel and machine
- Files can be loaded over the network (SMB/FTP) or USB
- We can provide training for buyer on operation of control system if needed
* Remote Pendant for zeroing / jogging
* Ships split for loading into container or trailer, will load on your trailer/truck and will ship FTL if you need
* Purchased 2023, one unit effectively has not been used, one used 1 hour per day, 5 days a week
* Under power and can demonstrate or cut your project though Feb 2026
* Video of operation:

 

[dmoore]

Additional photos.

 

[dmoore]

Additional Photos.

 

[dmoore]

2 Units Available. Price reduced to $14,995

 

[BDA]

Does this have a vacuum hold down or is it clamps?

 

[dmoore]

It has a spoil board now but the spoil board is bolted down to a T-Slot Table. Of Course you could pull this off and make a vacuum plenum fairly easily if you needed vacuum hold down. Since you are in Houston, come by and see them in operation.

 

[dmoore]

Price reduced to $12,995.

 

[dmoore]

Pricing reduced to $11,995. Crazy cheap for this.