Hp 800w

[vapor103]

Hey does anyone know if the orange bracket on the back side of the printer in-between the base and printer is supposed to come off? Looks like it's just zip tied on and if cut will slide right out.

 

[balstestrat]

Yeah you can just take it off, it comes right out after cutting the zip.
It's some pre-unit stuff that's been forgot there etc.

If you got more questions I've been using one for 3 months now.
https://signs101.com/threads/new-hp-latex-700-and-800-series-with-white-ink.162517/

 

[vapor103]

Yeah you can just take it off, it comes right out after cutting the zip.
It's some pre-unit stuff that's been forgot there etc.

If you got more questions I've been using one for 3 months now.
https://signs101.com/threads/new-hp-latex-700-and-800-series-with-white-ink.162517/

Thank you Is there any bolts that get tightened after pulling the bracket or is the void space fine?

 

[Joe House]

Don't you have a tech there to set it up for you?

 

[balstestrat]

Thank you Is there any bolts that get tightened after pulling the bracket or is the void space fine?

Nah nothing. For me it was just loosen and pulled it out, nothing else needed.

Don't you have a tech there to set it up for you?

Might be that the tech forgot it, as it's not mentioned anywhere in the docs.

 

[vapor103]

Nah nothing. For me it was just loosen and pulled it out, nothing else needed.


Might be that the tech forgot it, as it's not mentioned anywhere in the docs.

That's what I figured since its under the printer and small just wanted to make sure thanks guys for the input