I purchased an used Hp Designjet 8000s a couple of months ago. It was very well maintained. At the very beginning I did not have any problem but for the last 3-4 weeks I've been having problems with the black printhead. Evry single morning it is clogged and I have to do a lot of printhead cleaning to be able to make it work again. I am not using OEM HP inks so I guess that there could be the problem...but at the very beginning I used the same inks and didn't have the problem. Any thoughts?
-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
HP DEsignjet 8000 black printhead
- Thread starter rujaque
- Start date
premiercolour
Merchant Member
premiercolour
Merchant Member
KM256MN-C-002107 14.7V / without a number HP. We sold quiet a few.
Printhead problem
I have a problem with one printhead, it starts printing ok and then stops printing, i do a pause and wait for one or two minutes, starts priniting ok again and then stops printing, I dont know what to do and there is not support for this kind of printers.
Thanks to everybody
I have a problem with one printhead, it starts printing ok and then stops printing, i do a pause and wait for one or two minutes, starts priniting ok again and then stops printing, I dont know what to do and there is not support for this kind of printers.
Thanks to everybody
sigmasigns
New Member
Same Problem as Tavo but with the Light Can Head.
Prints a few cm then the color will gone slowly, fixing only if i press pause on the machine for few minutes, have someone a solution.
Prints a few cm then the color will gone slowly, fixing only if i press pause on the machine for few minutes, have someone a solution.
