HP Latex L26500 Long Banners

[Mega Format]

Hello,
Want to let know our experience with the new latex, since it is so hot, when printing a long banner more than 30' it starts to wrinkle and damage the banner, there is a setting in the onyx profile input tension moved it up to 30 and it works fine, also increase the vacuum to 20.

Mega Format
http://www.megaformat.net

 

[Slamboni]

profiles

have you found or created planty of decent onyx profiles for the L26500? We use SAi and I'm having a hard time finding profiles for mesh etc.

 

[Mega Format]

Mesh Banners on Latex

Mesh Banner for the latex is a little tricky in my side, when its warming up its pulling back and forth that make the plastic backing to separate from the banner so what i do i move the material well out of the printer and when it starts to print i pull it until i see the backing flat attached to the banner, then it runs smoothly, the heat must be set low Dry 120, Cure 200.
Good Luck.

Mega Format
Brooklyn NY
http://www.megaformat.net

 

[Mega Format]

Profiles for Latex Mesh

Any profile with the settings i mention above should work on Mesh since its drying fast.
Mega Format

 

[Slamboni]

cheers

nice. thanks mega. y'all lost a good brooklyner last week. condolences.