denny19901
New Member
Downsizing my shop - bought all 3 pieces of equipment back in 21 and the printer and plotter is still in use and will be until sold. A hp tech recently replaced a color calibration part on the printer and ran a full diagnostic (everything is operating correctly). No software. Attached are all 3 sell sheets for details on these. Laminator has not been used in about 6 months (works fine, we have 2 so we stored this one - it will need to be caried down a set of stairs - see specs for weight). The white in the printer was never used so it is expired. Some inks are expired but all inks in the machine and in our stock will go with the printer (We may have a new white head as well). Although everything is in working order (we would be happy to demo everything in person), everything is being sold as is. Hp suggests you use buck boosters (voltage regulators) for both the 220 lines – if you would like to disconnect to take them, we are ok with it. We prefer a pickup (so you confirm the working conditions), but willing to ship only if you (the buyer) hires a packing and shipping company. Please email with any questions Denny@DelawareSIGNshop.com (email for videos I cannot attach here).
| HP Latex 800W 64" Printer |
| 1 SIGMONT-65H 61" Wide Format Roll Lam Cold w/Heat |
| Summa S2 T-Series 62" Cutter OPOS CAM $19,720 |