Posterboy
New Member
Still finding my way with my new secondhand Roland EcoSol.
I'm testing a banner stock, and have found a profile that gives me acceptable print quality, but the ink just doesn't want to dry.
I ended up running it with the heater on 50 degrees C, and with a fan heater blowing straight onto it, but I had to let it rset for 5 minutes before it was dry. I was running A1's for the test, so it was no big deal, but if I run a 2 metre banner and load up the take up roll I think I will have problems. I'm thinking of changing the print to uni directional to slow the print speed.
I was hoping to get some feedback from you guys as to whether I should keep trying to make the stock work, or just ditch it?
I'm testing a banner stock, and have found a profile that gives me acceptable print quality, but the ink just doesn't want to dry.
I ended up running it with the heater on 50 degrees C, and with a fan heater blowing straight onto it, but I had to let it rset for 5 minutes before it was dry. I was running A1's for the test, so it was no big deal, but if I run a 2 metre banner and load up the take up roll I think I will have problems. I'm thinking of changing the print to uni directional to slow the print speed.
I was hoping to get some feedback from you guys as to whether I should keep trying to make the stock work, or just ditch it?