Need Help Issue with laminator

[FASTSIGNS524]

We have a Kala Mistral 1650 laminator. The laser eye seems to be off today as we cant reset that to be able to run it. Any ideas of what we can do.

 

[JBurton]

Any chance its not the laser, but a fuse?

 

[Boudica]

Check the emergency stop button. If it's pushed in, pull it out.

 

[MarkSnelling]

I believe Sonoma Graphics has an authorized tech out of Seattle. You can call the technician from Kala. His name is Max and his number is 817-966-5763. Most things on a Kala can be swapped out by the user if you need a part.

 

[Boudica]

I believe Sonoma Graphics has an authorized tech out of Seattle. You can call the technician from Kala. His name is Max and his number is 817-966-5763. Most things on a Kala can be swapped out by the user if you need a part.

Good to know, thanks Mark! About a week ago I had the same problem as the OP. We thought we were gonna need a tech, and had no idea who to contact.
....turned out that the e-stop button on the back had gotten pushed in.

 

[citysignshop]

all I want.....is a frickin' laser! Is that too much to ask?