-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
japanese language on valujet
- Thread starter gzolee
- Start date
John Butto
New Member
Stealth Ryder
New Member
Hold the CANCEL button down while powering on the machine. Once it beeps at you let off, press the DOWN arrow button once, hit ENTER... Turn the machine off, let sit for 15 seconds then turn it on normally...
What were you doing to set it to Japanese? Just curious...
What were you doing to set it to Japanese? Just curious...
it was dead
The printer was totaly dead just some lights on the board and i have taken out the board cleand from the dust cleand the sensors and now is coming back to life i still need to clean the heads and the pipes but never seen a printer befor jost lots of computers the next stage is when i jtag it becouse there is a xilinx spartan on the board but never done something before. im going to try this in a minute ohhhh yes we are english and the second day that the printer boots up. Thanks Ryder.
The printer was totaly dead just some lights on the board and i have taken out the board cleand from the dust cleand the sensors and now is coming back to life i still need to clean the heads and the pipes but never seen a printer befor jost lots of computers the next stage is when i jtag it becouse there is a xilinx spartan on the board but never done something before. im going to try this in a minute ohhhh yes we are english and the second day that the printer boots up. Thanks Ryder.
Last edited:
Stealth Ryder
New Member
You are welcome...