• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

JV3 leave line straight line in the black?

Freeride

New Member
Hi,
I have a JV3 and the black leave straight line, like if it was missing ink... It's not smoth print, we can see if we print with 4 pas or 8 pass.
It is major but is not perfect...
Heads are new,
Everything are adjusted X and Y,
Printest are ok,
Icc is ok for the media.
Head is adjusted to thin, but it make the same thick.

The blue as a little bit the same problem, cyan and magenta are ok.

So i don't know which adjustement is missing to correct that

Any coments?

Thanks,
 

BRUSHMARKS

New Member
do a good head cleaning on the far left of machine pull off the chrome panel adn lightly clean the heads and then do a "ink fill" to flush out the nozzels on the head.
 
Top