Laser on engraving stock wholesaler

[Hoze]

Hi,
I have a customer who is looking for some laser-engraved circles, about 3.5 x 3.5 inches. I don't have a laser machine, but I want to run this job for my client. Can anyone here recommend a wholesaler, like Signs365, who can handle engraving stock?
Thanks!

 

[JBurton]

Like, you want the circles already lasered? Or you just want the laserable material cut into 3.5" circles?

 

[Ryze Signs]

What material do you want engraved? There are different types of lasers for different materials. I have both a CO2 laser and a fiber laser.

 

[TEN]

Johnson Plastics offers fabrication. https://www.jpplus.com/

 

[bpp]

Trying my luck here. A customer wants 50 pieces of acrylic 3x3 printed with a drill hole. I am looking for a wholesaler to either take on the whole job or I can print it and send it over to someone to cut with reg marks etc. Too small to cut on my colex. If anyone know of something please let me know.

 

[JBurton]

Too small to cut on my colex.

Too small?

 

[bpp]

Too small?

3x3" 1/8" always a struggle

 

[JBurton]

3x3" 1/8" always a struggle

With a hole in it, it's kinda easy. Drill 50 holes, shoot 50 wood screws, cut the outer shape, remove wood screws. If you have a conveyor belt, I wouldn't recommend this unless you can throw a piece of mdo on it.
Another option is to mask the back side with a layer or two of premask, then don't cut it all the way out, leaving them attached to the premask.
I realize you're asking for wholesalers, not how to run your gear, but it's all I got in my bag of tricks!