Lej 640

[Modela]

I have lej 640 Roland when we print 18x24 on a 4 x8 coraplast sheet and go to print the other side the prints never match up back to back they are always off by 1/4 or 1/2 left to right can anyone help ?

 

[thesignpost]

If you look at the platen to the right, there is a line on the plate. Line up your sheet to that mark.

 

[Modela]

If you look at the platen to the right, there is a line on the plate. Line up your sheet to that mark.

Thanks I will try that