Michael-Nola
I print things. It is very exciting.
Hey all - my GS6000 is currently printing with "no data" (heads draw ink but nothing fires on the page) and I need someone to come look at it for repairs. I can't seem to find any service technicians in the area, does anyone have a suggestion?
As far as self-repairs go - I'm sure replacing the data cables and mainboard are the next steps for troubleshooting, however I have two problems with throwing parts at it:
1. I can't determine if or how the mainboard fuse would blow. If I put another board in, it could just blow again.
2. I can't find the fuses on the mainboard (nothing labeled F for fuse) - so I can't test or confirm if the fuses are actually blown.
As far as self-repairs go - I'm sure replacing the data cables and mainboard are the next steps for troubleshooting, however I have two problems with throwing parts at it:
1. I can't determine if or how the mainboard fuse would blow. If I put another board in, it could just blow again.
2. I can't find the fuses on the mainboard (nothing labeled F for fuse) - so I can't test or confirm if the fuses are actually blown.