Material Centering issue on GS 6000

[Happyprinter]

We are having a terrible time of getting the print to center on our scrim coming off of our GS 6000. Talking to Epson about it has gotten us nowhere. When we load our media, say 38", we center it, run it from our Wasatch Rip and still have to play with our parameters. Initially, when you load the material into the machine, the head comes out checks each side then returns, I'm assuming to find determine the size of material loaded and center? What suggestions could you give me to check to get this thing to center?

 

[jhanson]

The printer will determine the media width, but you still have to manually set the width into Wasatch for the auto-center feature to work properly. The printer's design puts about a 5mm margin on the right edge of the media, and sometimes less than that on the other side.

 

[Happyprinter]

Thanks for the reply. Have been out of the office for awhile so sorry for the late response. Still having issues with the centering of material. Will have to play with the settings in Wasatch more.

 

[boxerbay]

your problem is wasatch. we hated it.

 

[VISCOM]

We are having a terrible time of getting the print to center on our scrim coming off of our GS 6000. Talking to Epson about it has gotten us nowhere. When we load our media, say 38", we center it, run it from our Wasatch Rip and still have to play with our parameters. Initially, when you load the material into the machine, the head comes out checks each side then returns, I'm assuming to find determine the size of material loaded and center? What suggestions could you give me to check to get this thing to center?

In the Wasatch Rip I take the Centering check off and on the left margin use 0.7 this centers the print

 

[jhanson]

your problem is wasatch. we hated it.

If you find a RIP that nobody will ever complain about (ever), I'll eat the hat that chihuahua is wearing.