Good morning, been lurking for awhile trying to gain as much knowledge as possible. I’ve searched and searched and I can not find the my fix. Like the title says I have a cjv300 plus and I’m trying to change ink set from cmyk+w2 to cmyk x2. I’ve replaced both printheads, all dampers, a new line set including color to color jumpers, and all new ink. I saw one post that said to go into system parameter and change 32 to 0, it was set to 2 and did the ink parameter to 0000. The only option it gives me to change ink set is cmyk+w or cmyk+w2. Does anyone have any advice or the proper procedure would be awesome. Thank you
-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
Mimaki cjv300-160plus ink set change
- Thread starter Tylerj56
- Start date
Solventinkjet
DIY Printer Fixing Guide
Doublecheck that the parameters actually saved. Sometimes they don't take the first try. I'd also try going into the Ink System Parameter 1 menu and changing parameter "000 INKSET" to 1. Then you should be able to boot up and see what color configuration the printer thinks it's in right now. That should help figure out what's going on. It might even just be ready to go and you just need to run a few strong cleanings to fill the machine.