• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Mimaki Issues

DRogers

New Member
Good morning. Can anyone on here help me out with my JFX200-2513 EX?. I changed the white ink line on Tuesday morning. The machine ran good all day, but then on Wednesday morning it started throwing different errors and now it goes right into this after it starts booting...SYSTEM HALT (2) 1bf: PCB MAIN-F2/F3. I have checked all of the fuses. I'm wondering if one of the lines got pinched when I put it back together, and it causing it to err. Any and all suggestions would be very helpful.
 

Solventinkjet

DIY Printer Fixing Guide
That error means the F2 or F3 fuse is blown on the main board. Make sure you tested the small ceramic fuses labeled F2 and F3. These aren't glass tube style fuses like most people are used to. If the fuses are actually good and this error still pops up, something else in that circuit is damaged or missing.
 

Smoke_Jaguar

Man who touches printers inappropriately.
*looks over message... In general section, not Mimaki... Ahh, new account and not even an introduction. Yup, we might see these guys login once or twice more*

Might want to contact your dealer. If you blew fuses changing an ink line, you are in for a helluva crazy expensive time. All for folks fixing things, but this is the 'calling the fire department from the smoldering crater' point of DIY. Get someone in who knows what they are doing, but you're probably looking at $4K+ in work.

We have both a Mimaki section https://www.signs101.com/forums/mimaki.208/
and a flatbed section https://www.signs101.com/forums/flatbed-printers.222/
 

DRogers

New Member
I did not say that I blew a fuse changing an ink line. The machine ran fine for a day and is now throwing errors. There are no blown fuses. I've gone through them all.
 
Top