• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Mimaki UJF 3042 evaluation problems

S

simplesignmanII

New Member
Bought second hand with additional ink tanks and was printing a test initially for a day or two then X crashed off the back stop while initialising which was fixed by moving the sensor by 2mm. Then I have an ink out of date warning for yellow. on replacing this I get both yellow and black need fixed. not sure where this going to. This has put a stop to evaluating the machine for now unless there are any ideas ?
 
Smoke_Jaguar

Smoke_Jaguar

Man who touches printers inappropriately.
Can just boot the machine in service mode and roll the date back. Is it a MK1 or MKII?
 
S

simplesignmanII

New Member
I have now done this and the machine is happy with the inks now.
I will reassemble and try a head clean and print.
eventually I may have to get uptodate inks once the tests are done.
Thanks
 
You must log in or register to reply here.
Top